When Your Hot Water System Suddenly Ceases Working: What to Do
When Your Hot Water System Suddenly Ceases Working: What to Do
Blog Article
What are your thoughts about What Would Cause My Electric Water Heater to Stop Working??
Many contemporary houses take advantage of an electric water heater for their heater, because of its benefit and ease of use. Nonetheless, just like any other electric devices, issues may arise with its use, suddenly. It can be really aggravating to wake up to a chilly shower instead of a warm one or having your bathroom with water that isn't hot adequate or perhaps as well hot. Whatever the instance may be, hot water heater troubles can be fairly stressful. Fortunately, we have actually made a listing of possible solutions to your water heater issues. There are a variety of variables that can create a number of these issues, it could be an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for safety and security. Whatever the issue is, getting it fixed must not pose way too much of a problem if you follow these actions:
Check Your Power Supply:
As standard as this might seem, it is really essential. Without sufficient power, your water heater will not operate. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, just turn it on and off again. Replace any kind of broken or worn-out fuse. Examine the home appliance with power after these changes to see if it's now functioning.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, after that try looking into your heating element if it is still functioning. Examine each of your heating elements to ensure the issue isn't with any one of them. If any of them is malfunctioning, change that part and after that inspect whether the hot water is back on.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to check the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the gain access to panel and also press the red button for temperature reset above the thermostat. This must help heat up the water. Transform the breaker back on and inspect if the trouble has been fixed.
Call A Professional:
If after replacing all malfunctioning components and resetting your temperature, the hot water heater still isn't functioning, you might need to get in touch with a professional plumber for a specialist opinion. The issue with your heating unit could be that the cold and hot taps have been changed or it might be undersized for the quantity of warm water required in your home. Whatever the case might be, a professional plumber would assist fix the trouble.
Verdict
Hot water heater troubles are not always major. A number of them are because of small concerns like a blown fuse or damaged burner. Changing the damaged components need to suffice. However, if you are still unable to solve the problem, give a call to your closest plumber to find to get it repaired.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
I'm very fascinated by What Would Cause My Electric Water Heater to Stop Working? and I really hope you liked the entire article. Enjoyed reading our content? Please share it. Let somebody else check it out. Thanks for your time. Kindly pay a visit to our blog back soon.
Expert hands available. Report this page